Windows 10 on Raspberry Pi 3 and 4

Requirements

1. Windows Image

Download the custom Windows image from Amin Dahan named ProjectNeon2.0.wim. Discord Channel

2. WoR Tool (Windows on Raspberry)

Download the latest version of the WoR tool from Pete Batard and Marcin (version 2.01 or newer): WoR Project Downloads

Installation

1. Start the WoR tool.
2. Check all options.
3. Important: Use the latest firmware before flashing.

Configuration & Overclocking

Consideration: It's recommended to overclock the Raspberry Pi for better performance, but this requires active cooling!

Modifying Config.txt

1. Give the BOOT drive of the SD card/SSD a temporary drive letter.
2. Open the file config.txt on the BOOT drive.
3. Add the following lines:

over_voltage=6
arm_freq=2000

Proof

It works!